How To Fix An Office Chair That Leans Back

Most office chairs are designed to lean back, but how do you know if your chair is broken? If the chair leans back too far or not enough, it can be a sign that something needs to be fixed. This article will show how to fix an office chair that leans back.

How To Fix An Office Chair That Leans Back

Fixing your Office Chair That Leans Back is easy with these steps. You can do it yourself in no time at all, without having to call in the professionals or buy a new one. So let’s get started.

Quick Fix for Leaning Office Chair

  • Remove the screws from the seat base of your office chair using a screwdriver. 
  • Check how far out the seat has come by looking at how much slack there is in the spring coil springs. If they are too close, loosen them with pliers and pull them down to get more length.
  • Re-tighten your screws into place when finished making adjustments and test out how it feels before putting everything back together again.
  • Repeat these steps on both sides of the chair until it is even on both sides.

The good news is that there are some easy things you can do in order to fix this problem so you can continue working without any discomfort.

Fix The Most Common Cause Of An Office Chair Leaning Back

Fixing a chair that leans back is not as difficult as it may seem. There are many reasons why someone would want to fix their office chair, but the most common reason is how uncomfortable it feels when you lean all of your weight on one spot for too long.

Check the Missing Screw

The first thing you should do is check the screws on the bottom of the seat. Make sure they are tight and not stripped or worn out. If this doesn’t work, try adding some washers between the screw head and base plate. This will give it more grip.

If this still isn’t working, then we recommend replacing all of these parts with new ones from your local hardware store before trying anything else.

Fix Loose Screw/Pin

Then checked loose screw, you can also try using a rubber mallet to tap in any loose pieces into place if need be as well.

Fixing Broken Casters

  • Remove any old cork gaskets with a screwdriver
  • Clean off the seat area where the caster will be installed
  • Apply silicone sealant around the edge (if needed) of the caster base before installation.

Turn the chair upside down

Sit in your chair with the seat facing downwards. Then, lift up both of your legs until they are pointing upwards and parallel to one another.

Final Words

Fixing your office chair-leaning office chair problem is actually pretty straightforward. All you need are some basic tools and about 10 minutes of time. We promise that if you follow our instructions carefully, your office chair won’t lean back again.

Leave a Comment